
Tile removal, hardwood floor strip-out, carpet pull, vinyl and linoleum removal, thin-set grinding, and subfloor demolition for contractors and homeowners across Vancouver, Burnaby, Surrey, and the Lower Mainland.
From ceramic tile to hardwood to carpet, we strip it clean and leave a surface ready for your new flooring installer.
Floor tile chipped up, thin-set ground off the subfloor, and all debris hauled. We handle tile on plywood, tile on concrete, and tile on cement board.
Nailed, glued, and floating hardwood and laminate flooring stripped and removed. Adhesive residue scraped clean for a smooth subfloor surface.
Carpet and underpad pulled and rolled, vinyl and linoleum peeled, and adhesive scraped or ground to leave a clean subfloor ready for new flooring.
Plywood subfloor, OSB, and underlayment removed when needed. We cut and pull subfloor sections down to the joists for full replacement projects.
Bad flooring removal leaves your installer with a rough, uneven surface that adds cost and delay to the project. We strip flooring cleanly, grind thin-set and adhesive, and leave a subfloor your tiler, hardwood installer, or vinyl layer can work on immediately.
Whether it is one room or an entire home, we bring the crew, the tools, and our own bins — one invoice, no surprises.

We confirm the flooring type, square footage, and whether subfloor or adhesive removal is needed. One all-in quote — removal, bins, hauling, and cleanup.
Baseboards are removed if needed, adjacent rooms and hallways are protected, and furniture is moved or masked.
Flooring comes up, thin-set gets ground, adhesive gets scraped, and everything goes into our bins. Most residential floors are done in a day.
All flooring debris leaves on our trucks. The subfloor is swept and vacuumed — ready for your new flooring to go down.
Get a free, all-in flooring removal quote — strip-out, thin-set grinding, bins, hauling, and broom-clean included.
Ceramic, porcelain, marble, and slate tile chipped up and thin-set ground off the subfloor. The most common flooring removal request in Vancouver kitchen and bathroom renovations.
Nailed, glued, and floating hardwood stripped and removed. We handle engineered hardwood, solid hardwood, and parquet — scraping adhesive and pulling nails for a clean subfloor.
Carpet and underpad pulled, tack strips removed, staples extracted. Vinyl and linoleum peeled and adhesive scraped or ground. Fast and efficient for whole-home flooring replacements.
When the subfloor itself needs to go — water-damaged plywood, rotten OSB, or multiple layers of old flooring — we cut and remove subfloor sections down to the joists.
Flooring removal in Vancouver typically costs $2 to $6 per square foot, depending on material type and condition. A standard 500 sq ft floor removal runs $1,000 to $3,000 all-in — labour, thin-set grinding, bins, hauling, and broom-clean handoff.
Carpet and vinyl are on the lower end; tile on concrete is on the higher end. Subfloor removal adds to the cost. Request a free quote for your specific scope.
Most residential flooring removal projects are completed in one day. A 500 sq ft tile removal takes 4-8 hours. Carpet and vinyl are faster. Larger homes or tile on concrete may take two days. Subfloor removal adds time.
Our flooring removal crew mobilizes throughout the Lower Mainland with same-week availability.
Full kitchen gut-outs, cabinet removal & countertop teardowns.
Learn MoreTile, tub, vanity & shower removal — down to studs.
Learn MoreStrip, haul & dispose — clean walls ready for re-boarding.
Learn MoreConcrete slabs, walkways, patios & foundations broken and hauled.
Learn MoreSend us your flooring removal scope or book a free walkthrough. All-in quote, same-week mobilization, bins on the truck.